Frame Installation Videos

Connecting the Stem to V Joint with the C Ring

First make sure all End Caps are tight. The C Rings can only be inserted in one direction, rotate and bend the stem to the proper orientation to insert the C Ring. Once attached make sure the C Ring opening is horizontally oriented at all times.

Connecting The Stems in a Multi-Stem Fixture

After attaching the lower stem to the V joint on the frame, you need to attach the upper stem to the lower stem with a "C" ring. Thread the "C" ring into the lower stem. Making sure that the wrapped wire holes are oriented on opposite sides, thread the "C" ring into the upper stem so that the wire is able to slide into the "C" ring creating an "S" shape.

Note: The holes for the “C” rings are biased to one side so that the “C” rings can only be threaded on the smaller side. This is intentional in the design.

Bulb Installation

Find the bulb with the matching number as the frame end joint. Unwrap the end joint, attach the C Ring, and screw on the matching bulb.

Cord Placement

When connecting the C ring to the Socket Ring the cord should bend in the same way the C Ring bends. This ensures that the Polyhedron will hang properly. When attaching the Polyhedrons to the frame make sure someone else is stabilizing the frame to keep it from swinging around.